Box Buddy low voltage mounting rings are
designed for positioning low voltage devices
next to 110 VAC electrical boxes with stan-
dard NEC spacing so that the combined 110
and low voltage device(s) may be covered
with one multi-gang coverplate for an
elegant appearance. The Box Buddy uses a
patent pending pull-off alignment tool that
makes combined installation and alignment
of 110 VAC and low voltage devices simple
and quick.
Box Buddy
Low Voltage Mounting Rings
Pull-off alignment tool
Box Buddy low voltage mounting rings
feature conduit flanges off-set by 5/8" which
enable un-obtrusive use of conduit connec-
tors (see photo bottom of page on reverse).
BB-11
Add 1 Low Voltage device to a 1 gang 110 VAC Box
110 Box
BB-12
Add 2 Low Voltage devices to a 1 gang 110 VAC Box
BB-21
Add 1 Low Voltage device to a 2 gang 110 VAC Box
110 box and Box Buddy with
alignment tool in place
BB-22
Add 2 Low Voltage devices to a 2 gang 110 VAC Box
OEM Systems Company, Inc.
740 Freeport Blvd., #106 Sparks, NV 89431-6168
775 355-0405 Fax 775 355-0646
Product materials & specifications are subject to change / improvement
|
Minolta Digital Camera ME 0308 User Manual
MSi Computer Drive US54G User Manual
Multiquip Pet Fence mtr 40hs User Manual
Napoleon Grills Gas Grill II 600 User Manual
National Instruments DJ Equipment NI LabVIEW User Manual
Navman GPS Receiver iCN 320 User Manual
NETGEAR Switch GS104 User Manual
Nokia Cell Phone N93i 1 User Manual
Numark Industries Music Mixer DXM03 User Manual
Patton electronic Stereo Receiver SmartNode 4300 User Manual